• Home

Squaby Demo

 import QtQuick 2.0
 import Felgo 4.0
  // needed for Box category

 /**
  * This component can be used for all obstacles in the level, e.g. bed, closet, teddy, chocolate, toy bricks, etc.
  * A collider is added for it, by default a 2*2 grid. For the bed and the closet a bigger collider is set.
  *
  */
 EntityBaseDraggable {
   id: obstacle

   // columnn & row may be set from outside, for easier positioning along the grid
   property int column
   property int row

   // this is the default in GameWindow anyway and needs not be set
   //gridSize: scene.gridSize

   entityType: "obstacle"
   // the variationType may be bed, teddy, chocolate, toy
   variationType: "teddy"

   x: column*gridSize
   y: row*gridSize

   // it must be above the path
   z: 1

   width: sprite.width
   height: sprite.height

   colliderComponent: collider
   // Cat3 is the foundationCollider of the towers, obstacles and path
   // Cat4 is the dragged tower - so this is exactly exchanged, so the dragged tower collides with the already existing towers
   colliderCategoriesWhileDragged: Box.Category4
   colliderCollidesWithWhileDragged: Box.Category3
   selectionMouseArea.width: sprite.width
   selectionMouseArea.height: sprite.height
   selectionMouseArea.x: -sprite.width/2
   selectionMouseArea.y: -sprite.height/2

   // this mouseArea should only be enabled when in levelEditing mode, where the obstacle can be dragged around or be destroyed
   // it should never be enabled for closet & bed, as these should not be selectable but fixed!
   selectionMouseArea.enabled: !scene.itemEditor.visible && scene.state === "levelEditing" && variationType !== "closet" && variationType !== "bed" && variationType !== "closet-door1" && variationType !== "closet-door2"

   opacityChangeItemWhileSelected: sprite

   onEntityClicked: {
     if(scene.state === "levelEditing") {
       hud.entitySelected(obstacle);
     }
   }

   property string spriteSource

   Component.onCompleted: {
     var type = variationType;
     if(type==="bed") {
       spriteSource = "bed.png";
       obstacle.z = 1; // this is needed for QML - z only is useful for siblings, and obstacle is the sibling elment!
       sprite.z = 1;

       // this is required, otherwise it would be deleted when a new level is loaded (as removeAllEntities is called there)
       preventFromRemovalFromEntityManager = true
     } else if (type==="closet"){
       obstacle.z = 1;
       sprite.z = 1;
       spriteSource = "closet-main.png";

       preventFromRemovalFromEntityManager = true
     } else if (type==="closet-door1"){
       spriteSource = "closet-door1.png";
       preventFromRemovalFromEntityManager = true
     } else if (type==="closet-door2"){
       spriteSource = "closet-door2.png";
       preventFromRemovalFromEntityManager = true
     } else if (type==="choco"){
       spriteSource = "choco-right.png";
     } else if (type==="book"){
       spriteSource = "book-left.png";
     } else if (type==="pillow"){
       spriteSource = "pillow.png";
     } else if (type==="soccerball"){
       spriteSource = "soccerball-left.png";
     } else if (type==="teddy"){
       spriteSource = "teddy.png";
     } else if (type==="toyblocks"){
       spriteSource = "toyblocks-left.png";
     } else{
       console.debug("WARNING: unknown obstacleType", type);
     }
   }

   MultiResolutionImage {
     id: sprite
     // source gets modified by the type
     z:obstacle.z // forward the z value set to the Obstacle, e.g. for bed & closet this will be set to 1 by default

     source: spriteSource !== "" ? Qt.resolvedUrl("../../assets/img/backgrounds/" + spriteSource) : spriteSource

     // We want to use anchoring for the closet doors so disable translate to center for these
     translateToCenterAnchor: (variationType === "closet" || variationType === "closet-door1" || variationType === "closet-door2") ? false : true
   }

   BoxCollider {
     id: collider
     // old:
     // colliderSize is by default 2*2 grids for all obstacle types (all except closet & bed)
     // the closet is split up in 3 files! thus set the original size of it manually to 74x91
     width: {
       if (obstacle.variationType==="bed") {
         return sprite.width;
       } else if(obstacle.variationType==="closet") {
         return 74;
       } else
         return 2*gridSize;
     }
     height: {
       if (obstacle.variationType==="bed") {
         return sprite.height;
       } else if(obstacle.variationType==="closet") {
         return 91;
       } else
         return 2*gridSize;
     }

     collisionTestingOnlyMode: true

     // the closet is not translated to the center!
     x: obstacle.variationType==="closet" ? 0 : -width/2
     y: obstacle.variationType==="closet" ? 0 : -height/2

     // Cat3 is the foundationCollider of the towers and obstacles
     // Cat4 is the dragged tower
     categories: Box.Category3
     collidesWith: Box.Category4
   }

   // for debugging the size of the obstacle
 //  Rectangle {
 //    //anchors.fill: parent
 //    width: 30
 //    height: 20
 //    color: "green"